Split air to water heat pump (7KW to 27KW)
Plugs

The Linsam split air water heat pump system is a heating, air-conditioning and ventilation system (HVAC) divided between an outdoor unit and an indoor unit. The two units are connected through the house by copper piping.

It has Below add-on options:

1. Add electric bottom heater
2. Add ABB soft starter
3. Wifi controller

Product Features

EVI air to water heat pump diagram

Split air source heat pump options

We provide OEM and ODM services

Stainless steel casing

The heat pump cover produce with stainless steel casing can protect from rust, special by seaside installation.

Addon bottom heater

With eelctrical bottom heater tap by bottom of the air source heat pump, it avoid freezing of heat pump.

Addon ABB soft starter

We can install ABB soft starter for your heat pump, the unit start more smoothly from 0 to rated voltage.

Add on wifi controller

With wifi controller you can set the heat pump by telephone, with the code it more conventional for our life.

Technical Parameters

Model TAN-03S TAN-05S TAN-06S TAN-10S
Cooling capacity kW 7.5 13.3 15.6 27.2
Input power kW 2.55 4.45 5.3 8.74
Heating capacity kW 8.4 15 17.8 32.6
Input power kW 2.55 4.45 5.2 9.38
Heating capacity kW 5.8 9.7 11.2 20.5
Input power kW 2.5 4.3 4.8 8.9
Cooling running current A 12.5/4.5 7.79 8.6 15.6
Heating running current A 13.8/4.8 8.4 9.2 16.8
Max running current A 17/8 12 16 24
Power source 220V/380V/50HZ 380V/3N/50HZ 380V/3N/50HZ 380V/3N/50HZ
Noise level dB(A) <55 <58 <60 <64
Outdoor unit Up fan W × D × H mm 670*640*820 810*780*1050 1390*670*820 1450*780*1050
Side fan W x D x H mm 830*310*710 830*310*1260 1300*420*1245 --
Unit weight kg 120 155 170 245
Indoor unit W × D × H mm 370*200*450 500*260*700 500*260*700 500*260*700
Unit weight kg 10 12 14 25
Working temp range ℃ -15℃-43℃ -15℃-43℃ -15℃-43℃ -15℃-43℃

*Test conditions:
1.Cooling: Air source side DB/WB is 35℃/–, inlet water temp 12℃, outlet water temp 7℃.
2.Heating(1): Air source side DB/WB is 7℃/6℃, inlet water temp 40℃ outlet water temp 45℃.
3.Heating(2): Air source side DB/WB is -12℃/-14℃, inlet water temp 40℃, outlet water temp 45℃.

Related products

split heat pump TAE-04S
Split air source heat pump 15kW

Air to water heat pump

split water pump water heater
Heat pump air water split 18kW

Air to water heat pump

Frequently Asked Questions

What kind of care is needed for the heat pump?

There is no need, just clean up debris and snow around the heat pump in time.

What compressor your equipment have?

For all our products, best quality parts are adopted to assure heat pump good quality and good performance, like this compressor, always adopt branded America Copeland compressor or Japan Sanyo/Daikin compressor or Danfoss compressor.

What is the service life of the heat pump?

Linsam heat pumps are up to 25 to 30 years service life. During their lifetime, approximately 15 to 20 years is usually necessary to replace the heat pump compressor.

Are heat pumps noisy?

No. Heat pumps are generally not noisy. Noise is marginally higher than ambient background sound, and usually not annoying.

Do the products have CE?

Sure,all products are CE approval products, we produce according to international standard, products export to European market.

What is the cost of heat pump operation?

The only cost is the charge for the electricity required compressor and circulation water pump. It based on how many kilowatts are required for your house, generally heat pump is the most efficient way to heat your house, and you save lots of money. And if a room is well insulated, that will require less kw of heat pump, so you can choose smaller model.

Scroll to Top